longbow #2
Moderator: Moderators
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
longbow #2
Hi Guys,
Here's a few pics of my second longbow build.
It really gets addictive once you make the first one, Start having different ideas and different things I want to try.
This one I have made in a lighter poundage for shoulder recovery after my reconstruction about 6 weeks ago.
Riser is cambia ash and walnut with a rock maple strip, and limbs are rock maple with black fiberglass
I was meaning to take more pictures along the way but got caught up in doing it and kept forgetting.
These are the negative and positive jigs I made up for the riser.
This is the handle glued up with tightbond3
Riser squared up after drying ready for fadeouts
Fade outs cut
I rip my laminations through at 40mm and them through to the thickness I want
Creating the taper on my laminations, this is my master taper with a lamination in it about to go through the widebelt sander
Cutting the angle onto the bottom of the laminations
Ready for glue up
Glued up and in the drying room
here is where I missed a fair few steps haha
Almost finished, read for final sanding and finishing coats
I Will Post up some pictures of it finished this week once its all done
Thanks
Tyler
Here's a few pics of my second longbow build.
It really gets addictive once you make the first one, Start having different ideas and different things I want to try.
This one I have made in a lighter poundage for shoulder recovery after my reconstruction about 6 weeks ago.
Riser is cambia ash and walnut with a rock maple strip, and limbs are rock maple with black fiberglass
I was meaning to take more pictures along the way but got caught up in doing it and kept forgetting.
These are the negative and positive jigs I made up for the riser.
This is the handle glued up with tightbond3
Riser squared up after drying ready for fadeouts
Fade outs cut
I rip my laminations through at 40mm and them through to the thickness I want
Creating the taper on my laminations, this is my master taper with a lamination in it about to go through the widebelt sander
Cutting the angle onto the bottom of the laminations
Ready for glue up
Glued up and in the drying room
here is where I missed a fair few steps haha
Almost finished, read for final sanding and finishing coats
I Will Post up some pictures of it finished this week once its all done
Thanks
Tyler
Re: longbow #2
Hi Tyler
That's a great lookin bow! Very nice combination of timber, the black glass on the back even contrasts nicely
Excellent job I say....full draw pic?
That's a great lookin bow! Very nice combination of timber, the black glass on the back even contrasts nicely
Excellent job I say....full draw pic?
Set Happens
Re: longbow #2
Tyler! I'm seriously impressed with your work. You seem to have a methodical way of going about it and your work is very good especially for the limited experience so far! . Addictive? Ha ! you better believe it! the only qualm i would have is in using titebond for riser glue ups. I know its used in all wood bows and I use it myself at times but I just prefer to use smooth on for all my serious work. There is no discernible reason for this but just believing in a good safety margin.Keep up the great work!
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
There will be one to come, I am just finishing it off now so will hopefully get a couple pictures tomorrow if im home before darkcmoore wrote:full draw pic?
Cheers
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
[quote="bigbob"]Tyler! the only qualm i would have is in using titebond for riser glue ups. I know its used in all wood bows and I use it myself at times but I just prefer to use smooth on for all my serious work. There is no discernible reason for this but just believing in a good safety margin. [quote]
Thanks,
The rest of the bow I have glued up with techniglue.
The day I glued up the riser we were out of techniglue and waiting for it to be delivered or I would have used it. due to the ice on the roads the trucks were running a fair bit behind.
Thanks
Tyler
Thanks,
The rest of the bow I have glued up with techniglue.
The day I glued up the riser we were out of techniglue and waiting for it to be delivered or I would have used it. due to the ice on the roads the trucks were running a fair bit behind.
Thanks
Tyler
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: longbow #2
Looking good
Re: longbow #2
Great looking bow there Tyler.
Re: longbow #2
Very nice work Tyler, once the bug has bitten you just keep going and taking the next bow to a new level.
The Cambia ash is interesting, is it white ash with the following treatment? I believe Brittons' Timber carry a few varieties of treated timber.
“The Cambia thermal modification process - a clean and energy efficient technology - uses high heat in a controlled atmosphere to improve both the dimensional stability and the decay resistance of wood by permanently altering its chemical and physical properties.100% FSC ® (FSC-C113479) certified, this non-toxic product provides a uniform coloration and could well be the first truly green lumber resource that performs better and costs less than alternative products developed to replace wood.
Cambia is a great looking product that is changing the way we think about where and how to how to use wood.
Cambia has applied its ground-breaking thermal modification process to popular American Ash, Oak, Maple and Poplar, creating an all-purpose, all weather products without peer.
By reducing the ability of wood to absorb moisture, Cambia has produced a dimensionally stable, decay resistant timber.
It is particularly suited to humid conditions where it is less prone to movement than traditional timbers. Applied finishes last longer on Cambia and maintenance is also reduced. Because it sequesters the carbon in wood, Cambia products have a rich, brown colour perfectly suited to modern domestic and commercial applications.
Cambia’s thermal modification process also removes the nutrients in wood that can provide a food source for insects and wood-destroying fungi. As a result, Cambia products do not contain any toxic chemicals.”
Daryl.
By the way you appear to have some good workshop tools.
The Cambia ash is interesting, is it white ash with the following treatment? I believe Brittons' Timber carry a few varieties of treated timber.
“The Cambia thermal modification process - a clean and energy efficient technology - uses high heat in a controlled atmosphere to improve both the dimensional stability and the decay resistance of wood by permanently altering its chemical and physical properties.100% FSC ® (FSC-C113479) certified, this non-toxic product provides a uniform coloration and could well be the first truly green lumber resource that performs better and costs less than alternative products developed to replace wood.
Cambia is a great looking product that is changing the way we think about where and how to how to use wood.
Cambia has applied its ground-breaking thermal modification process to popular American Ash, Oak, Maple and Poplar, creating an all-purpose, all weather products without peer.
By reducing the ability of wood to absorb moisture, Cambia has produced a dimensionally stable, decay resistant timber.
It is particularly suited to humid conditions where it is less prone to movement than traditional timbers. Applied finishes last longer on Cambia and maintenance is also reduced. Because it sequesters the carbon in wood, Cambia products have a rich, brown colour perfectly suited to modern domestic and commercial applications.
Cambia’s thermal modification process also removes the nutrients in wood that can provide a food source for insects and wood-destroying fungi. As a result, Cambia products do not contain any toxic chemicals.”
Daryl.
By the way you appear to have some good workshop tools.
"And you must not stick for a groat or twelvepence more than another man would give, if it be a good bow.
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
Re: longbow #2
Great work Tyler
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
greybeard wrote:Very nice work Tyler, once the bug has bitten you just keep going and taking the next bow to a new level.
The Cambia ash is interesting, is it white ash with the following treatment? I believe Brittons' Timber carry a few varieties of treated timber.
“The Cambia thermal modification process - a clean and energy efficient technology - uses high heat in a controlled atmosphere to improve both the dimensional stability and the decay resistance of wood by permanently altering its chemical and physical properties.100% FSC ® (FSC-C113479) certified, this non-toxic product provides a uniform coloration and could well be the first truly green lumber resource that performs better and costs less than alternative products developed to replace wood.
Cambia is a great looking product that is changing the way we think about where and how to how to use wood.
Cambia has applied its ground-breaking thermal modification process to popular American Ash, Oak, Maple and Poplar, creating an all-purpose, all weather products without peer.
By reducing the ability of wood to absorb moisture, Cambia has produced a dimensionally stable, decay resistant timber.
It is particularly suited to humid conditions where it is less prone to movement than traditional timbers. Applied finishes last longer on Cambia and maintenance is also reduced. Because it sequesters the carbon in wood, Cambia products have a rich, brown colour perfectly suited to modern domestic and commercial applications.
Cambia’s thermal modification process also removes the nutrients in wood that can provide a food source for insects and wood-destroying fungi. As a result, Cambia products do not contain any toxic chemicals.”
Daryl.
By the way you appear to have some good workshop tools.
Hi Daryl,
Yes it is and this is stock from Brittons timber. We use it in outdoor furniture from time to time and I had put a few off cuts to the side a while ago thinking I would use it somewhere.
Thanks
Tyler
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
Nice timber selection Tyler and your joinery looks perfect. Do you have a lot of taper in the limbs or a very long draw length? The full draw pic looks like it could maybe bend a bit more on the inner third of the limb and be a bit stiffer towards the tips. Probably just the camera angle Great work mate.
Cheers... Rod
Cheers... Rod
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
rodlonq wrote:Nice timber selection Tyler and your joinery looks perfect. Do you have a lot of taper in the limbs or a very long draw length? The full draw pic looks like it could maybe bend a bit more on the inner third of the limb and be a bit stiffer towards the tips. Probably just the camera angle Great work mate.
Cheers... Rod
Hi Rod,
I Have a 31 1/2" draw so it is a little long, haha
I do have a fair taper on the laminations, they are about 2.7mm down to .9mm over the 920mm length.
Thanks
Tyler
Re: longbow #2
OK mate, yes you have a long draw alright. How long is your bow NTN? I use the same rate in the whole stack (4 x 0.0015"/" tapers instead of 3 x 0.002"/" tapers).
Cheers...Rod
Cheers...Rod
-
- Posts: 72
- Joined: Tue Jan 17, 2012 12:08 pm
Re: longbow #2
rodlonq wrote:OK mate, yes you have a long draw alright. How long is your bow NTN? I use the same rate in the whole stack (4 x 0.0015"/" tapers instead of 3 x 0.002"/" tapers).
Cheers...Rod
It's about 70" Rod, I haven't actually measured it just kept it as long as posible.
Yea I am going to make up a couple more master tapers at different rates and see how they shoot.
This one seems to shoot a lot smoother them my first one which I had a lot less taper on.
Cheers
Tyler