Old Billy Bow's
Moderator: Moderators
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Old Billy Bow's
Gday all, as I have mentioned on here I have been researching and developing a bow of my own design, number one is complete and ready for testing and some stats soon to follow. Draw weights will be added when I get my hands on a decent scale, hopefully tomorrow. And a FPS when I can afford a chrono, bow is shooting straight and it feels fast to me, and have not noticed any handshock.
Cheers Sean
64" D/R Hybrid
37 pound at 28 inch draw length / Stored energy = 33.83 ft-lbs
7.5" brace height
17" riser
1 3/8" limbs
1/8"positive tiller (split finger)
Riser cut to centre (+1/16" with calf hair rest)
radiused arrow shelf and 3" sight window
thumb cheek
Zebrawood limbs with carbon fibre backed action-boo cores
Bubinga and Zebrawood riser with coretuff accents
Bubinga and Sambar deer antler overlays
D97 Flemish twist string
Calf hair arrow rest.
Cheers Sean
64" D/R Hybrid
37 pound at 28 inch draw length / Stored energy = 33.83 ft-lbs
7.5" brace height
17" riser
1 3/8" limbs
1/8"positive tiller (split finger)
Riser cut to centre (+1/16" with calf hair rest)
radiused arrow shelf and 3" sight window
thumb cheek
Zebrawood limbs with carbon fibre backed action-boo cores
Bubinga and Zebrawood riser with coretuff accents
Bubinga and Sambar deer antler overlays
D97 Flemish twist string
Calf hair arrow rest.
Last edited by Goatchaser on Thu Oct 03, 2013 11:44 am, edited 11 times in total.
-
- Posts: 859
- Joined: Mon Jul 09, 2012 10:18 am
- Location: Woodford Queensland
Re: Old Billy Bow's
Shes a beauty mate!! Very impressive.
Re: Old Billy Bow's
Fan-bloody-tastic for number one mate. Very nice indeed, some very good contrasting materials.
Cheers....... Rod
Cheers....... Rod
Re: Old Billy Bow's
Oh yeah........thats nice.
Have you a photo of it strung Goatee?
Have you a photo of it strung Goatee?
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thankyou very kindly fella's, Yeah I have a pic of it strung but it was taken back in the shed, so forgive the particle board background. I will pose for you all at full draw tomorrow when the missus is around to operate the camera for me,
Cheers Sean
Cheers Sean
Re: Old Billy Bow's
Thats very nice, I like that shape, very pleasing to the eye that! Well done buddy!
One day I will try a Lam bow, but I think I would like to watch someone a few times first, I think!
One day I will try a Lam bow, but I think I would like to watch someone a few times first, I think!
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thanks mate, funny you say that because I would really like to make some self bows down the track too, inspired by people such as yourself.
Re: Old Billy Bow's
My oh my! Haven't we done well for our selves! I sure am liking what i see! Post some details later how it performs, 'cause it looks impressive.
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thanks Bob, that means a lot coming from someone like yourself, as for the stats, I needed a bow lighter than my compound 60lb as the missus was fairly disappointed when she couldn't pull it and I would be in deep doo doo if I got another she couldn't use, was fairly keen on a PSE item that Fanto had for sale on here but was a bit heavy, and explained my situation to him he recommended around 40 lb so this is what I was aiming for at my draw length of 28 inches, as Julie draws a little shorter than me this would make a nice weight to hopefully spike her interest levels further and be a good form practice bow for myself also, I must say after some tests this morning I am very chuffed, pics are uploading now and I will keep you posted.
Cheers Sean.
Cheers Sean.
Re: Old Billy Bow's
SWEET...... er.. that that description should be D/R too mate
Well the strung up photo looks the goods, looking forward to seeing full draw piccy later.
Cheers....... Rod
Well the strung up photo looks the goods, looking forward to seeing full draw piccy later.
Cheers....... Rod
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Cheers Rod, I think that's the third mistake I have edited in the first post now There we go that that's better
Last edited by Goatchaser on Sun Oct 13, 2013 1:16 pm, edited 3 times in total.
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
This picture is a little deceiving as the ceiling in my lean to shed is on a slant, the joins in the wall sheet and ceiling are far from level, and the lines were drawn with a spirit level and roofers square. Just zone in and focus on the bow and you'll be right.
moved curve chart to next page, (updated)
moved curve chart to next page, (updated)
Last edited by Goatchaser on Sun Oct 13, 2013 1:18 pm, edited 1 time in total.
Re: Old Billy Bow's
Force draw curve looks good with gradual increase, and some preload. In the full draw shot on the tiller tree even allowing for the background, my eye is drawn to a spot above the fade on the right limb. It seems to have a sort of 'knuckle' or something at that point . Maybe its just a camera angle.
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
not sure Bob, I traced the limbs and spun the bow on the tree then did the same, the lines match up almost perfectly, about 1.5mm difference, and I can't seem to miss the target with it , bow is feeling really nice, no hand shock and very smooth to draw, just needs some string silencers and all will be good.
I can't see the compound bow leaving the wall for a while now.
Cheers Sean.
I can't see the compound bow leaving the wall for a while now.
Cheers Sean.
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: Old Billy Bow's
Nice mate top job.............i'd say that knuckle is just the camera showing up where you cut the sight window hey......
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thanks Rod, not sure as I said on the tree and flipped they look fine , but I can see in that pic, also the fades are different top to bottom plays a bit of a trick on the eye, even when not drawn.
Cheers Sean.
Cheers Sean.
Re: Old Billy Bow's
Think your 100% right now I had another look Rod.Just shows one should engage brain before putting mouth into gear. So great job anyway on the bow. Some really nice touches too like the antler overlay. something I been going to do for ages but haven't got around to it.Look forward to more .
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Out the shed grinding away on some knife blades thinking about it, and I clicked as to what you were talking about Bob, I thought you meant the shape of the limb itself, but I think you were referring to the little kink that seems to be in the bamboo line in the limbs, which is as Rod called it, where the shelf is cut in makes it look like a kink in the lams.
Re: Old Billy Bow's
Persactly! Optical illusion for a near sighted old fogey.
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
Re: Old Billy Bow's
Very nice work Sean. I really like the timber/antler combo, you must be as happy as a pig the proverbial hey!
Keep up the great work man.
Cheers, Rob.
Keep up the great work man.
Cheers, Rob.
The shortest distance between two points is a FLATLINE
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thankyou kindly Rob , Rob's, Rod's and Bob's forgive me if I mix up the names I am very happy with the bow, also let a mate have a few shots with it, not long after that we were on the computer picking out his choice of timbers, so stay tuned for number 2 soon to come.
Cheers Sean.
Cheers Sean.
- Stickbow Hunter
- Supporter
- Posts: 11637
- Joined: Sat Jul 26, 2003 8:33 pm
- Location: Maryborough Queensland
Re: Old Billy Bow's
Wow that is some first effort mate. It looks great. Very well done - congrats!!!
The bow isn't a hybrid it is a semi recurve.
Jeff
The bow isn't a hybrid it is a semi recurve.
Jeff
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Knocked this one up because a mate wanted one to hang on his office wall says he might use it one day. (he's a local artist and loves timber) using the first bow as reference I have got my stacks spot on now, as he wanted a bit heavier than the last I built I made it 40# 28", 64"NTN. Very much the same as the first without carbon added, 1 1/2" limbs no positive tiller and some different timbers with a slightly different grip, (low wrist).
Riser is walnut with curly maple accents,
Red elm limbs with hard rock maple cores,
sambar deer antler, hard rock maple and curly maple overlays,
Cheers Sean.
Riser is walnut with curly maple accents,
Red elm limbs with hard rock maple cores,
sambar deer antler, hard rock maple and curly maple overlays,
Cheers Sean.
Last edited by Goatchaser on Thu Oct 03, 2013 4:31 pm, edited 1 time in total.
- Stickbow Hunter
- Supporter
- Posts: 11637
- Joined: Sat Jul 26, 2003 8:33 pm
- Location: Maryborough Queensland
Re: Old Billy Bow's
Great work once again mate. Those wood combinations go nice together.
Jeff
Jeff
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thanks Jeff the walnut is a nice simple grain but it seems to be a winner I reckon.
- Bent Stick
- Posts: 414
- Joined: Sun Jul 26, 2009 9:06 pm
- Location: Sunshine Coast
Re: Old Billy Bow's
Thats some beautiful work, I love the bow,knife and whstle combo, you'd be a nut to break em up they look the business.
Awesome bow porn
Awesome bow porn
If your not having fun, your doing it for all the wrong reasons
- Goatchaser
- Posts: 302
- Joined: Tue Jun 18, 2013 11:50 pm
- Location: Port Augusta
Re: Old Billy Bow's
Thanks guys, the comments are very rewarding to my ears.
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: Old Billy Bow's
great job mate
Re: Old Billy Bow's
very very nice work goatchaser
your grip design looks like it would be very agreeable, reminds me a lot of a Toelke grip.
thanks for sharing!
your grip design looks like it would be very agreeable, reminds me a lot of a Toelke grip.
thanks for sharing!
"So long as the new moon returns in heaven a bent, beautiful bow, so long will the fascination of archery keep hold in the hearts of men" The Witchery of Archery, Maurice Thompson