Chinese Made Broadheads
Moderator: Moderators
Chinese Made Broadheads
I got given three Chinese three blade broadheads with replaceable blades. I shot two of them at a fox a couple of days ago and both of them fell to pieces, the blades came out of them.
Any one else had similar failures.
Matt
Any one else had similar failures.
Matt
- Stickbow Hunter
- Supporter
- Posts: 11637
- Joined: Sat Jul 26, 2003 8:33 pm
- Location: Maryborough Queensland
Re: Chinese Made Broadheads
Nah Matt I haven't as I still shoot the good old Ribteks. It's been awhile since I've sent one of those towards any game too.
Re: Chinese Made Broadheads
Hello Matt, is there any way you can post a picture of these Chinese Broadheads.
I may be able to tell you something about them once I see what they look like.
Cheers.
I may be able to tell you something about them once I see what they look like.
Cheers.
Re: Chinese Made Broadheads
Hi Bill
Its the blue one, the other is a Montec G5 which I have had good success with on foxes. Sorry pic is a little bit blurry
Matt
Its the blue one, the other is a Montec G5 which I have had good success with on foxes. Sorry pic is a little bit blurry
Matt
Re: Chinese Made Broadheads
Hi Matt, looking into it, will get back to you with an answer later today.
As for the G5 a good head for when you have a light FOC weight requirement as in the head alone.
Cheers.
As for the G5 a good head for when you have a light FOC weight requirement as in the head alone.
Cheers.
Re: Chinese Made Broadheads
Hello Matt,
I found what I think may be you Chinese copy.
It's call "Allen Lightning 3-100.
Blades of Stainless Steel.
Batwing Shoulder.
1 Vent in each Blade.
Blue Ferrule, Cone Tip.
Measurements may be slightly different.
Length: 2.17" ; width 1.05"
Tip of blade fits under back shoulder of Cone Tip.
Back edge sits in/under locking nut. Locking nut could be smooth or knurled.
My view is that the Chinese versions of many Broadheads are the worst.
In this instant.
The Cone tip needs to Punch its way through an Animals hide, there in itself is a loss of a lot of energy to get through to any vital organ.
The Tip in this case is so short that is worse than that of a field point.
If there is any movement in the blades when fully assembled they will definitely break loose or explode on any slight contact.
Most if not all Chinese Broadheads are reversed engineered of someome else's hard work.
Ok, I hope that is of some help, unless you have any further information about those heads that I colud use as reference material.
Cheers.
I found what I think may be you Chinese copy.
It's call "Allen Lightning 3-100.
Blades of Stainless Steel.
Batwing Shoulder.
1 Vent in each Blade.
Blue Ferrule, Cone Tip.
Measurements may be slightly different.
Length: 2.17" ; width 1.05"
Tip of blade fits under back shoulder of Cone Tip.
Back edge sits in/under locking nut. Locking nut could be smooth or knurled.
My view is that the Chinese versions of many Broadheads are the worst.
In this instant.
The Cone tip needs to Punch its way through an Animals hide, there in itself is a loss of a lot of energy to get through to any vital organ.
The Tip in this case is so short that is worse than that of a field point.
If there is any movement in the blades when fully assembled they will definitely break loose or explode on any slight contact.
Most if not all Chinese Broadheads are reversed engineered of someome else's hard work.
Ok, I hope that is of some help, unless you have any further information about those heads that I colud use as reference material.
Cheers.
Re: Chinese Made Broadheads
Hi Bill
Thanks for that.
Matt
Thanks for that.
Matt
Re: Chinese Made Broadheads
Hello Matt, I found this from my collection files.
- Attachments
-
- The Broadhead that the Chinese copied.
- Allen Broadhead..jpg (55.39 KiB) Viewed 8067 times
-
- Posts: 787
- Joined: Thu Jan 10, 2013 11:19 am
- Location: Sydney NSW
Re: Chinese Made Broadheads
Mate I made the mistake of buying a dozen of them once; they are typical Chinese CRAP!!!!
3 out of 12 spun up ok then when I shot one into corflute cardboard; CARDBOARD they just fell apart.
Cheers
3 out of 12 spun up ok then when I shot one into corflute cardboard; CARDBOARD they just fell apart.
Cheers
Re: Chinese Made Broadheads
Hi Bill
I sent you a couple of PM's, did you get them.
Matt
I sent you a couple of PM's, did you get them.
Matt
Re: Chinese Made Broadheads
Hello Matt,
No mate, I haven't received any messages at this point in time.
If it's easier you can call me on 0458084493.
Cheers.
No mate, I haven't received any messages at this point in time.
If it's easier you can call me on 0458084493.
Cheers.
Re: Chinese Made Broadheads
Hello Matt.
This afternoon I returned a PM to you just to see if its working.
Cheers.
This afternoon I returned a PM to you just to see if its working.
Cheers.
Re: Chinese Made Broadheads
Hi Bill
I got it and replied.
Matt
I got it and replied.
Matt
Re: Chinese Made Broadheads
Hi Matt,
Sorry mate the messages just aren't getting through.
What the problem is I don't know.
Did a test run with Outbackdad and all went well.
So like I said you can call me and have a chat, but leave it until tomorrow now.
Cheers.
Sorry mate the messages just aren't getting through.
What the problem is I don't know.
Did a test run with Outbackdad and all went well.
So like I said you can call me and have a chat, but leave it until tomorrow now.
Cheers.
Re: Chinese Made Broadheads
Hi Bill
Must be at my end, but I have been sending PM's to another member and every one has gone thru.
Will have to investigate.
Matt
Must be at my end, but I have been sending PM's to another member and every one has gone thru.
Will have to investigate.
Matt