need a little knolage

How to make a Bow, a String or a Set of Arrows. Making equipment & tools for use in Traditional Archery and Bowhunting.

Moderator: Moderators

Post Reply
Message
Author
User avatar
terryzac
Posts: 492
Joined: Sun Jul 12, 2009 4:18 pm
Location: south of brizzy

need a little knolage

#1 Post by terryzac » Tue Nov 03, 2009 7:47 am

ok i use a 80# longbow ( d bow, selfbow ) and i'm trying to put together some traditional style arrows. they will be trad except for the broadheads. i have the shafts which i purchased nealy 2 years ago now ( cant rush these things). i will be using turkey feathers when i get them. my prob is the weight i should use for the broadheads. i also have some that i got years ago but dont know much about them. how do you determin how many grains somthing is, and what do i need
thank you
terry

User avatar
Steven J
Posts: 797
Joined: Fri Apr 27, 2007 10:13 pm
Location: away for a while...
Contact:

Re: need a little knolage

#2 Post by Steven J » Tue Nov 03, 2009 8:02 am

The mass of the broadhead depends on the spine of your arrows and your draw length also. Since there is no shelf on your bow, I would be shooting 70-75lb spined arrows at 28" in length with a 125g broadhead. If you wish to increase the mass of the broadhead you can increase the spine of the arrow. If you increase the length of your arrow, you should increase the spine of the arrow also - about 5lb per inch is a good rule of thumb.

Spining arrows is a bit of trial and error. The most important factor that I have found is that all the arrows are spined the same. Even if they are a little out of spine, the fletching will straighten the arrow and they should all hit the same spot. With practice your mind should make the adjustments needed to hit the spot you are looking at.

Steve
http://www.stevenjawerth.weebly.com

On Christ the solid rock I stand, All other ground is sinking sand. Edward Mote, 1797-1874

matt61
Posts: 702
Joined: Sun Jul 15, 2007 9:22 pm
Location: melbourne

Re: need a little knolage

#3 Post by matt61 » Tue Nov 03, 2009 9:45 am

Hi Terry I have a cheap digital grain scale,paid $70 for it,makes working out weights easy up to 1000 grains you might get one cheaper at Cashconverters or Ebay.
Matt

User avatar
Gringa Bows
Posts: 6331
Joined: Thu Aug 30, 2007 7:09 pm
Location: Bundaberg QLD

Re: need a little knolage

#4 Post by Gringa Bows » Tue Nov 03, 2009 9:53 am

or you could try Scrub bull,i think i paid $35 for mine..................Rod

User avatar
Steven J
Posts: 797
Joined: Fri Apr 27, 2007 10:13 pm
Location: away for a while...
Contact:

Re: need a little knolage

#5 Post by Steven J » Tue Nov 03, 2009 9:55 am

As Matt said, try ebay for scales. They may not always measure in grains, but you can always convert (1g = 15.4324 grains). You should not pay more than about $25 for a 1 decimal place scale.

Steve
http://www.stevenjawerth.weebly.com

On Christ the solid rock I stand, All other ground is sinking sand. Edward Mote, 1797-1874

longbow steve
Posts: 3116
Joined: Tue Jan 30, 2007 3:29 pm
Location: BLUE MOUNTAINS

Re: need a little knolage

#6 Post by longbow steve » Tue Nov 03, 2009 10:00 am

Grain scales are available via Amso 128/JCM, I think the last set I purchased was around the 30-40 dollar mark. Steve

User avatar
Gringa Bows
Posts: 6331
Joined: Thu Aug 30, 2007 7:09 pm
Location: Bundaberg QLD

Re: need a little knolage

#7 Post by Gringa Bows » Tue Nov 03, 2009 10:11 am

i know i'm going to sound like a dummy but what do you mean by 1 decimal place scale,Steven....the set i've got has g,oz,dwt,gn.and as Steve said John has scales too....Rod

User avatar
GrahameA
Posts: 4692
Joined: Thu Mar 10, 2005 4:28 pm
Location: Welcome to Brisneyland, Oz

Re: need a little knolage

#8 Post by GrahameA » Tue Nov 03, 2009 12:03 pm

Hi Rod
LB rod 55 wrote:i know i'm going to sound like a dummy but what do you mean by 1 decimal place scale,Steven....the set i've got has g,oz,dwt,gn.and as Steve said John has scales too....Rod
If I weigh something and the scale says:

1.0 then it is weighing to within 1 decimal place. i.e. there is one figure after the decimal point. It actual weight (as far as the scale is concerned which may not be its true weight) will lie in the range

0.95 to 1.04
------
Extra Boring Stuff

Plus on top of this, if we were interested, would be how accurate the scale is and what doe its calibration chart look like.

So we could bop on down to the local Metrology Lab and run the scale against a set of known values and determine just how accurate the scale is across it range of measurement. It all depends on what you want.

And are you interested in weight or mass?
Grahame.
Shoot a Selfbow, embrace Wood Arrows, discover Vintage, be a Trendsetter.

"Unfortunately, the equating of simplicity with truth doesn't often work in real life. It doesn't often work in science, either." Dr Len Fisher.

User avatar
terryzac
Posts: 492
Joined: Sun Jul 12, 2009 4:18 pm
Location: south of brizzy

Re: need a little knolage

#9 Post by terryzac » Tue Nov 03, 2009 12:17 pm

thanks guys for all the info. the conversion rate will help immensley.
what should the max weight of the broad head be for a 28 1/2" draw. this measure is from the knock where the string sits to the front of the bow. is this the correct way to determine draw length
thank you
terry

matt61
Posts: 702
Joined: Sun Jul 15, 2007 9:22 pm
Location: melbourne

Re: need a little knolage

#10 Post by matt61 » Tue Nov 03, 2009 12:26 pm

Terry I would only buy a scale from Cashconverters as a last resort as when I last looked the prices where a bit steep for a secondhand one as there is a big demand by the local lads for weighing their sun dried tomato leaves and powders for their energy drinks :lol:
Matt

User avatar
Trad Bound
Posts: 828
Joined: Sun Sep 10, 2006 3:29 pm
Location: Melbourne,Australia

Re: need a little knolage

#11 Post by Trad Bound » Tue Nov 03, 2009 1:02 pm

Matt
there maybe a couple of Lines there but I will leave them alone this time :mrgreen:

User avatar
pdccr
Posts: 1285
Joined: Sun Jan 25, 2009 7:07 pm
Location: Mackay

Re: need a little knolage

#12 Post by pdccr » Tue Nov 03, 2009 1:15 pm

Had to read it twice to pick up on that :lol:
Cheers, Toby

User avatar
Gringa Bows
Posts: 6331
Joined: Thu Aug 30, 2007 7:09 pm
Location: Bundaberg QLD

Re: need a little knolage

#13 Post by Gringa Bows » Tue Nov 03, 2009 1:25 pm

:lol: :lol:..................and thanks Grahame for clearing that up for me :D ..........Rod
Last edited by Gringa Bows on Tue Nov 03, 2009 1:38 pm, edited 1 time in total.

User avatar
terryzac
Posts: 492
Joined: Sun Jul 12, 2009 4:18 pm
Location: south of brizzy

Re: need a little knolage

#14 Post by terryzac » Tue Nov 03, 2009 1:36 pm

i always wondered what was in those energy drinks
terry

matt61
Posts: 702
Joined: Sun Jul 15, 2007 9:22 pm
Location: melbourne

Re: need a little knolage

#15 Post by matt61 » Tue Nov 03, 2009 9:11 pm

Tradbound I think you snort of got the picture :lol:
Matt

wal
Posts: 285
Joined: Mon Nov 27, 2006 7:27 am

Re: need a little knolage

#16 Post by wal » Tue Nov 03, 2009 9:16 pm

:D :D :D :D jeez Matt, your on a row, I mean, roll, tonight :D :D :D

matt61
Posts: 702
Joined: Sun Jul 15, 2007 9:22 pm
Location: melbourne

Re: need a little knolage

#17 Post by matt61 » Wed Nov 04, 2009 6:50 pm

Another thing with buying secondhand grain scales from Crimeconverters is don't take it with you in your luggage when you fly to your next big hunting trip or you could have one of those sniffer dogs at the airport sit down next to you and look at you with a look of YOUR **** IS GRASS in its eyes.
Matt

Post Reply