Two new bowyers graduated this weekend just gone

How to make a Bow, a String or a Set of Arrows. Making equipment & tools for use in Traditional Archery and Bowhunting.

Moderator: Moderators

Post Reply
Message
Author
User avatar
yeoman
Posts: 1563
Joined: Mon Mar 08, 2004 1:32 pm
Location: Canberra

Two new bowyers graduated this weekend just gone

#1 Post by yeoman » Wed Jul 29, 2015 8:04 pm

Hi all,

long time no speakies. I've been far too busy with work and family and such to do much bowyering lately, but last weekend had the pleasure of teaching a couple of guys how to make longbows.

Laying out:

Image

One of the students was (is) a veteran archer and brought another bow to show off. A nice custom job from Italy. He had hoped to make his longbow with a larger section handle than is typical for the bows made on this course. This is the first time I've had a student make a bow on the course with a built up riser, and I'm pleased to say the result was rather aesthetically and ergonomically pleasing.

Here's a rough idea of what we would do:

Image

The workshop is actually quite well lit, but the heat box throws the exposure well off.

Image

About three hours of cooking between 55 and 60 degrees is enough to set the EA-40 Smooth On hard enough for our purposes. We're not the types to stand around and wait, so I put the box on a five dollar timer so tat in the morning the resin in set, and the bows have returned to ambient temperature:

Image

Here I've more accurately drawn in the outline of the riser for the Student to cut and grind to:

Image

Filing nocks:

Image

The other bow was a more typical bend-through-the-handle longbow. Here we have the tiller on this bow sinking quite nicely, especially for a first effort:

Image

Sinking the tiller on the other one:

Image

The stave is Ironbark, and the riser is Spotted Gum. This picture is really quite a shame, as it doesn't do the woods or the finish justice. It truly was very beautiful. Now, there's a good lesson in this picture. Notice how the riser does not begin where the limb starts to significantly thicken out of the bending portion. If it did, the handle would pop off. It is important for the bow to thicken a good amount from bending thickness before the riser starts. Also, while there are two decorative peaks in the riser, in the center it actually only adds about 6 mm. This is more than enough to make the bow functionally completely stiff.

Image

Image

Here the two resultant longbows spoon on the table before being taken out to show what they could do:

Image

Just shy of 50lb at 27":

Image

A couple of glory shots:

Image

Image

EDIT: The next course, if anyone i interested, is October 9th to 11th. More details in the link in my signature.
Last edited by yeoman on Thu Jul 30, 2015 6:45 am, edited 1 time in total.
https://www.instagram.com/armworks_australia/

Bow making courses, knife making courses, armour making courses and more:
http://www.tharwavalleyforge.com/

Articles to start making bows:
http://www.tharwavalleyforge.com/index. ... /tutorials

hunterguy1991
Posts: 859
Joined: Mon Jul 09, 2012 10:18 am
Location: Woodford Queensland

Re: Two new bowyers graduated this weekend just gone

#2 Post by hunterguy1991 » Wed Jul 29, 2015 8:06 pm

Nicely done lads!!

User avatar
bigbob
Posts: 4098
Joined: Sat Jul 10, 2010 8:55 pm
Location: sunshine coast

Re: Two new bowyers graduated this weekend just gone

#3 Post by bigbob » Fri Jul 31, 2015 2:56 pm

good work there Yeoman! It would be a great opportunity for any one down your way to get great tutelage on the art of wooden bows! Hope you get lots of interest!
nil illigitimo in desperandum carborundum
razorbows.com

User avatar
yeoman
Posts: 1563
Joined: Mon Mar 08, 2004 1:32 pm
Location: Canberra

Re: Two new bowyers graduated this weekend just gone

#4 Post by yeoman » Fri Jul 31, 2015 9:24 pm

Cheers mate, thanks for the vote of confidence!
https://www.instagram.com/armworks_australia/

Bow making courses, knife making courses, armour making courses and more:
http://www.tharwavalleyforge.com/

Articles to start making bows:
http://www.tharwavalleyforge.com/index. ... /tutorials

User avatar
Gringa Bows
Posts: 6331
Joined: Thu Aug 30, 2007 7:09 pm
Location: Bundaberg QLD

Re: Two new bowyers graduated this weekend just gone

#5 Post by Gringa Bows » Sat Aug 01, 2015 10:52 am

Good one

Post Reply