Lamination thickness - Question
Posted: Sat Dec 13, 2014 10:35 pm
In my recent efforts to build my first bow I decided to go and visit Flatliner who was kind enough to lend a hand. It was suggested to me that I should do a lot more research about the thickness of my laminations and my core.
I was wondering if anyone could give me some help for a recommended lam thickness. The bow that I'm wanting to make is a 66" Deflex/Reflex longbow with 1.5 inch limb width with 40 thou glass on the back and 50 thou glass on the belly. My goal weight is approximately 45# @28"
Any tips and constructive criticism is more than welcome!
Thanks to Flatliner for being so helpful and welcoming.
Thank you
~Matt
I was wondering if anyone could give me some help for a recommended lam thickness. The bow that I'm wanting to make is a 66" Deflex/Reflex longbow with 1.5 inch limb width with 40 thou glass on the back and 50 thou glass on the belly. My goal weight is approximately 45# @28"
Any tips and constructive criticism is more than welcome!
Thanks to Flatliner for being so helpful and welcoming.
Thank you
~Matt