Page 1 of 1

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:09 pm
by looseplucker
Are you sure there is no Lazarus moment for your stricken friend?

Sincere condolences.

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:10 pm
by Stickbow Hunter
Did the 'Check-Mate' check out mate? :( :D

Sorry for your loss.

Jeff

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:11 pm
by Gringa Bows
You have my sympathy mate, i know he went on a lot of trips with you,going by the injury's in the photo it must have been quick :cry: :cry: but maybe his limbs can be transplanted :idea: stiff upper lip and all mate.........

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:17 pm
by Nephew
Mate, I send condolences . I shoot a Chek-Mate too (Attila), and understand your loss. :( The only bright side I can think of is-at least it wasn't the Huntsman!

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:17 pm
by jindydiver
Always sad to see :(

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:18 pm
by kimall
We might be able to glue it up mate if not pass the limbs onto someone that could make good use out of them.ME
Cheers KIM

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:33 pm
by Nutgrass
R.I.P. old mate. Our thoughts are with you.

If you want a cuddle Chucker, you will have to come & visit :shock:

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:37 pm
by Gringa Bows
Your such a tart Gidget,you'll just hug anybody :shock: :lol:

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 6:53 pm
by excelpoint
I have no words mate. :(

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 7:17 pm
by terryzac
sad to see mate. hit kim up to make you a new riser

terry

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 7:23 pm
by Nephew
LB rod 55 wrote:Your such a tart Gidget,you'll just hug anybody :shock: :lol:
Now you know why I keep coming up with excuses when he invites me up! :lol:

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 7:24 pm
by Jeffro
you could fix it couldnt ya Darren?

What a bugger,how did that happen

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 7:29 pm
by Nephew
terryzac wrote:sad to see mate. hit kim up to make you a new riser

terry
Apparently the bloke that makes Chek-mate bows has gone A.W.O.L.,Terry, or so it says at the Chek-Mate site-

http://www.recurves.com/news_events.html
Bloody big shame if he's decided to give it up, hey?


Added hours later-
I just realised it says hit KIM up, not hit HIM up! I thought your were talking about the bloke that made it! Man, I must look like a lunatic sometimes! :oops: :P :lol:

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 7:56 pm
by Nephew
From what I can work out reading that link, Darren, apparently Chad was the dealer for Chek-mate archery , but a chap called Marc actually built the bows. Whatever, they are a bloody good bow. It's sad to see one in that condition your is in, big loss, Bud.

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 9:20 pm
by Gringa Bows
i agree Tony,SHAME SHAME SHAME :roll: :?

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 9:45 pm
by hazard
Condolences mate your have my sympathy. Just remember the soul may be reborn 45 days ( after ordering of course) in the form of another. So you too can share Kimals keen spirits of a visit from the mailman with a package.
Hazard

Re: A Death in the Family!!!

Posted: Wed Jun 22, 2011 10:05 pm
by kimall
Now boys I see how you may think I may be lacking in compassion but have you not seen the adds on tv about organ donors you need to put the emotions aside and think clearly at a time like this and let the organs(limbs) go to another family member in need.They will let another live on.. :wink:
Cheers KIM

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 11:32 am
by Bent Stick
Condolences, I have lost two in similar fashion in my family and even today it smarts and can occasionally get a little dust in the eye when you dwell on it. keep the organs on ice and pray for a successful transplant with a caring surgeon to ease the pain.

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 11:35 am
by excelpoint
I like your thinkin Kim. I can see a good WARF project for them.

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 11:40 am
by TomMcDonald
Speachucker, may we all remember the freedoms he fought hard to maintain and bow our heads in silence for one minute every year on the anniversary of his tragic passing. :cry:

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 1:23 pm
by stringnstik
this sort of thing saddens my heart, I have never been a fan of Euthanasia but seriously Kimall and the rest of you.. give it a break..oops i mean put it down would ya ..sorry i mean have a little compression at this time of great tension. Its had a great life, why drag it through a lingering painfull and indecent and drawn out finale. Its gone out in a cracker, the last throw of the dice... do not patch it and condem it to a half life of what once was..

burn it and stick the ashes on the windowsill:)

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 7:22 pm
by kimall
Now after much condemnation and dispersions about me having no heart :cry: I have an idea. :idea: Give me the riser too and I will make a nice hunting knife with the timber from the riser on the handle.(Which you will prob break too).That way it will live on forever(until you lose it) and I wont be racked with quilt.So there see the little lump of coal in my chest just smoldered a bit. :shock:
Cheers KIM

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 7:40 pm
by little arrows
It's only broken, it's not gone - we have the technology to create artificial limb attachments - go with the good glue and tech screws, and may it live on. :lol:


cheers
sue

Re: A Death in the Family!!!

Posted: Thu Jun 23, 2011 10:33 pm
by greybeard
Any positive thoughts on why it broke and have you done an autopsy on the deceased.

Daryl.

Re: A Death in the Family!!!

Posted: Fri Jun 24, 2011 7:50 am
by UPTHETOP
Sorry for your loss my Friend.
She was truely a great part of your life.
She just waited around to be picked up and used at your will, A true lady you might say.
The memories together out in the bush can never be replaced by any ILF cold hearted steel my friend.
She would be glad I think, to know it came quick and fast, a little like yourself - she told me.
May her memories come to the fore by the camp fire at night and bring happiness to your heart,
Then, when remembering you may shed a little tear, but what's that - the HUNTSMAN is now here.

A true Loss for any bowhunter.

May she R.I.P

cHEERS wAYNO

Re: A Death in the Family!!!

Posted: Fri Jun 24, 2011 9:23 am
by TomMcDonald
Stirring poetry Wayno.

Re: A Death in the Family!!!

Posted: Fri Jun 24, 2011 9:47 am
by hardgainer
Prayers sent from Vic. :(

Re: A Death in the Family!!!

Posted: Fri Jun 24, 2011 7:30 pm
by muntries
From what I can work out reading that link, Darren, apparently Chad was the dealer for Chek-mate archery , but a chap called Marc actually built the bows. Whatever, they are a bloody good bow. It's sad to see one in that condition your is in, big loss, Bud.
Yep Chad is/was one of the main dealers that chekmate used, while Marc took over the company quite recently and was apparently moving workshop etc. I had an order for a Kings Pawn recurve and after 18months the bow hadn't been started and Chad had not heard a thing from him (I think he's a member here so he'd probably be able to give a better answer if he's still floating about). I cancelled my order and ordered a Toelke bow but before I did Chad mentioned that a number of other dealers have also had supply issues but one other hadn't so he's still making orders and seems to have dropped the others, I even heard something about Marc designing a series of new bows etc but that is as much as I've heard. Poor form really from a business and trust point of view and especially from quite a well respected company :roll:

Simon

Re: A Death in the Family!!!

Posted: Fri Jun 24, 2011 7:32 pm
by muntries
terrible news about your bow, sick as a chip comes to mind!